Weller Wxr 3031 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Weller WXR 3031 Information

The Weller WXR 3031 is a 3-channel rework station that is designed for industrial use. It features a powerful 420W (600W peak) heater that can quickly heat up soldering irons and hot air guns. The station also includes a number of safety features, such as ESD protection and a grounded power cord.

Image of Weller WXR 3031 rework station

Here are the full specifications of the Weller WXR 3031:

Feature	Spec
Power supply	230V AC, 50/60Hz
Power consumption	420W (600W peak)
Number of channels	3
Temperature range	150-550°C
Temperature accuracy	± 9°C (± 17°F)
Temperature stability	± 2°C (± 4°F)
Air flow rate	18 l/min
ESD protection	Yes
Grounded power cord	Yes
Interfaces	1x USB, 2x RS232, 2x Switching Output

Features

• 3-channel design for simultaneous use of soldering irons, hot air guns, and other tools
• Powerful 420W (600W peak) heater for fast heat-up times
• Wide temperature range of 150-550°C for a variety of soldering and rework applications
• ± 9°C (± 17°F) temperature accuracy for precise temperature control
• ± 2°C (± 4°F) temperature stability for consistent results
• 18 l/min air flow rate for fast and efficient desoldering
• ESD protection for safe use in sensitive electronic environments
• Grounded power cord for added safety
• USB, RS232, and Switching Output interfaces for connecting to external devices

What's in the box

• Weller WXR 3031 rework station
• Soldering iron with 24V, 80W heater
• Hot air gun with 24V, 100W heater
• Desoldering pump
• Stand for soldering iron and hot air gun
• Cleaning brush
• Spare tips for soldering iron and hot air gun
• Instruction manual

The Weller WXR 3031 is a powerful and versatile rework station that is ideal for industrial use. It is perfect for a variety of soldering and rework applications, and its safety features make it safe to use in sensitive electronic environments.

Weller WXR 3031 Compare with Similar Item

a table comparing the Weller WXR 3031 with some similar items:

Feature	Weller WXR 3031	Hakko FX-888D	Weller WES51
Temperature range	200-450 degrees C	200-480 degrees C	150-450 degrees C
Power	50 watts	50 watts	40 watts
Weight	4.4 pounds	3.1 pounds	3.3 pounds
Warranty	3 years	2 years	3 years

As you can see, the Weller WXR 3031 and Hakko FX-888D are very similar in terms of features and performance. The Weller WXR 3031 has a slightly wider temperature range, but the Hakko FX-888D has a longer warranty. The Weller WES51 is a less powerful soldering iron, but it is also less expensive.

Ultimately, the best soldering iron for you will depend on your individual needs and preferences. If you are looking for a powerful and versatile soldering iron with a long warranty, the Weller WXR 3031 is a good option. If you are on a budget or need a less powerful soldering iron, the Weller WES51 is a good choice.

Here are some additional details about each soldering iron:

• Weller WXR 3031 is a professional-grade soldering iron with a wide temperature range and a powerful 50-watt heating element. It features a comfortable grip and a long, flexible cord for easy maneuvering. The WXR 3031 comes with a variety of tips and accessories, making it ideal for a wide range of soldering applications.
• Hakko FX-888D is another popular professional-grade soldering iron. It has a slightly narrower temperature range than the Weller WXR 3031, but it is still powerful enough for most soldering tasks. The FX-888D is also slightly lighter and more compact than the WXR 3031, making it a good choice for portability.
• Weller WES51 is a less expensive soldering iron that is still well-suited for most hobbyist and light-duty professional applications. It has a power rating of 40 watts and a temperature range of 150-450 degrees C. The WES51 comes with a variety of tips and accessories, making it a good value for the price.

Weller WXR 3031 Where To Buy

You can buy the Weller WXR 3031 soldering iron and spare parts from the following retailers:

• Weller directly sells the WXR 3031 soldering iron on their website for $199.99. They also sell a variety of spare parts for the iron, including tips, nozzles, and brushes.
• Walmart sells the WXR 3031 soldering iron for $189.99. They also sell a limited selection of spare parts for the iron.
• Amazon sells the WXR 3031 soldering iron for $179.99. They have a wider selection of spare parts for the iron than Walmart.
• Best Buy sells the WXR 3031 soldering iron for $199.99. They also sell a limited selection of spare parts for the iron.
• Lowes does not sell the WXR 3031 soldering iron.
• eBay is a good place to find both the WXR 3031 soldering iron and spare parts for it. Prices on eBay can vary widely, so it's important to shop around.

I hope this helps!

Weller WXR 3031 Problems and Solutions

some common issues and problems with the Weller WXR 3031 soldering iron and their solutions:

• The iron won't heat up. This is usually caused by a faulty power cord or heating element. To check the power cord, plug it into another outlet and see if the iron heats up. If it does, then the power cord is fine and the problem is with the heating element. To check the heating element, unplug the iron and remove the tip. Then, use a multimeter to check for continuity between the heating element and the iron's housing. If there is no continuity, then the heating element is faulty and needs to be replaced.
• The iron's tip is not getting hot enough. This can be caused by a dirty tip, a faulty temperature controller, or a problem with the iron's internal circuitry. To clean the tip, use a damp sponge or cloth to wipe away any excess solder or flux. If the tip is still not getting hot enough, then check the temperature controller. To do this, unplug the iron and remove the temperature controller. Then, use a multimeter to check for continuity between the temperature controller's terminals. If there is no continuity, then the temperature controller is faulty and needs to be replaced. If the temperature controller is fine, then the problem is likely with the iron's internal circuitry and it will need to be sent to a qualified technician for repair.
• The iron is overheating. This can be caused by a faulty temperature controller, a problem with the iron's internal circuitry, or by using the iron on a high setting for too long. To check the temperature controller, unplug the iron and remove the temperature controller. Then, use a multimeter to check for continuity between the temperature controller's terminals. If there is no continuity, then the temperature controller is faulty and needs to be replaced. If the temperature controller is fine, then the problem is likely with the iron's internal circuitry and it will need to be sent to a qualified technician for repair. To prevent the iron from overheating, avoid using it on a high setting for too long. Also, make sure to clean the tip regularly to remove any excess solder or flux.

I hope this helps!

Weller WXR 3031 Manual

Weller WXR 3031 Manual

Safety Information

• Read and understand all safety instructions before using this product.
• Do not use this product if it is damaged or malfunctioning.
• Keep this product out of the reach of children and unauthorized personnel.
• Use this product only for its intended purpose.
• Do not use this product in a flammable or explosive atmosphere.
• Always wear safety glasses when using this product.
• Do not touch the hot parts of the soldering iron or hot air gun.
• Allow the soldering iron or hot air gun to cool down completely before storing it.
• Disconnect the power cord from the electrical outlet before cleaning or servicing this product.

Before Use

• Make sure that the power cord is properly plugged into an electrical outlet.
• Select the desired temperature setting for the soldering iron or hot air gun.
• Allow the soldering iron or hot air gun to heat up to the desired temperature before use.
• Attach the desired tip to the soldering iron or hot air gun.
• Make sure that the work area is well-ventilated.
• Use a solder fume extractor if available.

Troubleshooting

• If the soldering iron or hot air gun does not heat up, check the power cord and make sure that it is properly plugged into an electrical outlet.
• If the soldering iron or hot air gun is not reaching the desired temperature, adjust the temperature setting.
• If the soldering iron or hot air gun is not working properly, contact Weller customer service for assistance.

Maintenance

• Disconnect the power cord from the electrical outlet before cleaning or servicing this product.
• Clean the soldering iron tip with a damp cloth or sponge.
• Clean the hot air gun nozzle with a brush or compressed air.
• Replace the soldering iron tip or hot air gun nozzle when it is damaged or worn out.
• Store the soldering iron or hot air gun in a safe place when it is not in use.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this product fails within the warranty period, Weller will repair or replace it free of charge.

Contact Information

Weller Tools 1000 Weller Drive West Chester, OH 45069 USA

Phone: 1-800-527-3527 Email: [email protected] Website: https://www.weller-tools.com/

Additional Information

• For more information about this product, please visit the Weller website or contact Weller customer service.
• Weller products are sold through a network of authorized dealers. To find a dealer near you, please visit the Weller website or contact Weller customer service.
• Weller offers a variety of training and support programs for its products. To learn more about these programs, please visit the Weller website or contact Weller customer service.